Topo B Pillar Protection Kit (Printed Series) - 2021+ Bronco 4 Door
- Additional protection
- Beautifully designed
- Easy to apply
- Includes 3M adhesive promoter and alcohol prep pad
- Fits ALL 4 door 2021+ Broncos
2021+ Bronco B Pillar Protection - 4 Door
These printed B pillar overlay photos do not do them justice. In person these look great! I can't believe we didn't make them sooner. They blend in really well with our printed series fender overlays as well.
It's easy to install and can cover up minor imperfections and discolorations in the B pillar.
Fits ALL 4 door 2021+ Broncos. Matte finish.
2 pieces:
- Left Pillar
- Right Pillar
Customization
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
- Military Themed
- Patriotic
- Other organizations
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
INSTALLATION
Use the following video and written instructions to complete the install.
You will want to do this in 80-85 degree weather ideally. Stay in the shade unless it is a little on the cool side.
Recommended items:
- This Kit (overlays + 3M promoter stick)
- Optional StickerFab Installation Fluid (1 bottle)
- Optional Squegee
- Microfiber
- Detailer spray to prep the area (without wax)
- Alcohol wipe
- Optional Heat gun or hair dryer
The fluid, squeegee, and microfiber can also be purchased as a kit here.
We recommend doing this after a fresh car wash. Re-clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the B pillar. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. You can use an alcohol wipe on the edges. Allow area to dry.
Prep both sides. Use an alcohol wipe or isopropyl alcohol in general to clean the edges. Note if the wipe is still dirty after use and use more if needed. Allow time to dry. Then use the 3M adhesive promoter on the edges of the pillar. It dries out quickly so you need to do both sides within a few minutes. The promoter is required as the pillar is textured and the curved edges need this preparation for the vinyl to stick properly. Allow time to dry.
It is possible to install the vinyl without application fluid (dry), if you are careful. This material is pretty forgiving if installed under the right temperatures. It also has air egress channels to prevent bubbles. Align the vinyl along the top and lead edge. Then push out the air carefully as to prevent creasing. You can also use a combination of your hands and the felt tip squeegee.
For a wet install, continue to read.
Apply application fluid to the target install and nearby surrounding area. Also apply it to the back of the material as it is removed from the backing paper. Apply it to your fingers for bonus points.
With fluid on the application area and material , you can change the alignment of the material by gently pulling up on portions and setting it back down.
Once you alignment is ideal, you can start to squeegee out the liquid. You may have to let the vinyl dry before doing the edges. You can use LIGHT heat to speed up the drying process and increase adhesion.
The adhesive reacts to PRESSSURE and HEAT.
Product description
- Additional protection
- Beautifully designed
- Easy to apply
- Includes 3M adhesive promoter and alcohol prep pad
- Fits ALL 4 door 2021+ Broncos
2021+ Bronco B Pillar Protection - 4 Door
These printed B pillar overlay photos do not do them justice. In person these look great! I can't believe we didn't make them sooner. They blend in really well with our printed series fender overlays as well.
It's easy to install and can cover up minor imperfections and discolorations in the B pillar.
Fits ALL 4 door 2021+ Broncos. Matte finish.
2 pieces:
- Left Pillar
- Right Pillar
Customization
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
- Military Themed
- Patriotic
- Other organizations
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
INSTALLATION
Use the following video and written instructions to complete the install.
You will want to do this in 80-85 degree weather ideally. Stay in the shade unless it is a little on the cool side.
Recommended items:
- This Kit (overlays + 3M promoter stick)
- Optional StickerFab Installation Fluid (1 bottle)
- Optional Squegee
- Microfiber
- Detailer spray to prep the area (without wax)
- Alcohol wipe
- Optional Heat gun or hair dryer
The fluid, squeegee, and microfiber can also be purchased as a kit here.
We recommend doing this after a fresh car wash. Re-clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the B pillar. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. You can use an alcohol wipe on the edges. Allow area to dry.
Prep both sides. Use an alcohol wipe or isopropyl alcohol in general to clean the edges. Note if the wipe is still dirty after use and use more if needed. Allow time to dry. Then use the 3M adhesive promoter on the edges of the pillar. It dries out quickly so you need to do both sides within a few minutes. The promoter is required as the pillar is textured and the curved edges need this preparation for the vinyl to stick properly. Allow time to dry.
It is possible to install the vinyl without application fluid (dry), if you are careful. This material is pretty forgiving if installed under the right temperatures. It also has air egress channels to prevent bubbles. Align the vinyl along the top and lead edge. Then push out the air carefully as to prevent creasing. You can also use a combination of your hands and the felt tip squeegee.
For a wet install, continue to read.
Apply application fluid to the target install and nearby surrounding area. Also apply it to the back of the material as it is removed from the backing paper. Apply it to your fingers for bonus points.
With fluid on the application area and material , you can change the alignment of the material by gently pulling up on portions and setting it back down.
Once you alignment is ideal, you can start to squeegee out the liquid. You may have to let the vinyl dry before doing the edges. You can use LIGHT heat to speed up the drying process and increase adhesion.
The adhesive reacts to PRESSSURE and HEAT.
Additional information
| Name | Topo B Pillar Protection Kit (Printed Series) - 2021+ Bronco 4 Door |
|---|---|
| SKU | 21BRNBPILLAR4PT-TPA51L |
| Vendor | StickerFab |
| Design | Area 51 Lines, Azure Lines, Cactus Gray Lines, Carbonized Gray Lines, Code Orange Lines, Badlands Orange Lines, Cyber Orange Lines, Eruption Green Lines, Hot Pepper Red Lines, Lightning Blue Lines, Race Red Lines, Rapid Red Lines, Velocity Blue Lines, White Lines, Cool Gray Lines |
Shipping & returns
BUCKLE UP OFF-ROAD RETURN, CANCELLATION, & SHIPPING POLICY
- CANCELLATION POLICY:
You may cancel your order if it has not shipped. Please reach out to us promptly with your full name, order number, reason for cancellation, and the specific items you wish to cancel. Please note that cancellations are subject to a 10% fee based on the original purchase price. This fee covers expenses incurred from our vendors and credit card processors, reflecting the costs associated with processing your initial transaction.
RETURN POLICY: We offer a 30 days returns policy. If your item arrives damaged or is found to be defective, please contact our customer service immediately. We are committed to resolving this for you promptly. For all other orders, please note that a restocking fee and shipping charges will apply.
If you accidently ordered an item, received the package and didn’t open it, you may receive a refund for the item's cost, minus the initial shipping, return shipping, and restocking fees.
RESTOCKING FEES: Please be aware that all returns are subject to a restocking fee. To determine the specific restocking fee for your return, kindly inquire with your customer support representative.
In cases of new product being returned the restocking fee is 10%. In cases where items exhibit damage, are missing parts, are not in their original condition, or show clear signs of use unrelated to any error on the part of Buckle Up Off-Road, a full restocking fee of 15% will be applied. It is essential to verify the compatibility of the selected parts with your vehicle model before placing your order. Should you have any questions, please reach out to us before ordering, as you may be responsible for both restocking and shipping fees.
A restocking fee is designed to cover the various expenses associated with processing returns, including transaction fees, shipping costs, and administrative fees.
While we strive to maintain a fair and transparent process, we do need to account for these expenses, which is why we have implemented a nominal restocking fee. This fee helps us offset some of the costs incurred, ultimately contributing to maintaining our everyday low prices.
Non-Returnable Items: Mount and Balance Wheel & Tire Packages Clearance Items Opened Items (If damaged or defective contact our customer service) Used or Installed Items Special Order Items Incomplete Items Items with Incomplete or Damaged Packaging Engine Internals Electronics Body Parts Oil and Aerosol Items Ford OEM Genuine Parts Wheel Spacers
REFUNDS: Upon receipt of the returned item, the process and method of issuing your refund will be contingent on the item's condition and the overall order duration. Your refund will be processed, subtracting any fees communicated by your customer support representative when you provide your RMA# and return details. Cancellations will receive a complete refund unless stated otherwise. If a gift card was utilized, the refund will initially be credited to the gift card, followed by the second form of payment.
Please keep in mind: It may require 3-5 business days for your return to be received, inspected, and processed. Refunds will be processed using the original payment method. Buckle Up Off-Road cannot issue a refund to an account not on record or any other separate accounts.
For refunds via Credit Card, it may take 3-5 business days to reflect on the customer's end. Refunds through PayPal may take 1-2 business days to show on the customer's end. Gift Card refunds may take 1-2 business days to activate.
SHIPPING: Buckle Up Off-Road ships via multiple carriers such as FedEx, UPS, USPS, and DHL. We cannot guarantee the shipping company used to deliver your products. Your order may be shipped in multiple boxes from different carriers. Orders take 24hrs to process and transit times vary. Shipping cutoff is 3:30pm EST. International orders are subject to higher shipping fees, and we reserve the right to add to it.
Any modifications to an address after the order is placed is subject to a fee. The flat rate fee for a single smaller package is $20, and for larger or multiple packages the fee is not limited to $60.
To prevent fraud, all shipments over $500 must be signed for. We will make three delivery attempts, which must be received by the recipient. Failure to receive the delivery within these three delivery attempts, will result in a shipping charge After the package is redelivered to us as well as a charge to reship the item to you.