Lower Door Protection - 2021+ Bronco 2 Door

SKU: 21BRONCOLWDR2-MBX2
In stock
$39.95
$39.95
Share
$8.98 Shipping under $349
Sold by Enthusiasts

BRONCO Lower Door Protection - 2 Door

So the first time we took the doors off the Bronco we heard tons of rocks getting thrown at it by those beefy MT tires.  Some light off-roading / mudding showed us where it gets sprayed the most as well.

We decided to add a little protection and styling at the same time.  This kit is enough to cover the lower door area of one full vehicle.  

From the factory we also have some paint defects in this area which we will be covering up.  It will also provide small amounts of protection when taking the doors off and putting them inside the storage bags.

Colors

We're starting off offering 4 different types of materials.  All of these materials are sourced in the US and are a premium choice for your vehicle.

Matte black is one of the easiest colors to install in general.  It stretches and responds to heat very well.

The gloss black we chose has air egress channels and that is why it is a little more expensive than standard colors.  Air egress channels assist in providing a path for air to escape during installation (less bubbles).  Some cost is also due to the fact that it is cast versus calendared.

General Formulations 3D carbon wrap also has air egress channels and a textured, dark appearance.  We've used it for tons of accents.  To clean, use 303 Aerospace Protectant.  It'll look great!  Don't use any type of wax.  This is the thickest material and offers the highest durability. 

Clear Oracal ORAGUARD 270G stone protection offers a transparent solution to paint protection.  It is 6 mil in thickness.

All options have high outdoor durability ratings.

NOTE:  2 sets are sold at a reduced price.  Keep it as a backup or in case your first install proves to be difficult.

INSTALLATION

Clean the application area to prepare it for installation.  Just use a wax free detailing spray if your vehicle is not too dirty.  Please reference our four door video until we are able to shoot a new one.  WE HIGHLY recommend that you have a friend help you hold the main piece as it is large and can catch air.  In general holding it yourself is awkward.

We aligned and installed the small front piece and rear piece first.  This allows you to guide the middle piece to meet up with both. 

NOTES:  We recommend that the installation area be free of wax and not under direct sunlight.  
Some will choose to clean the application area with rubbing alcohol which is okay.

"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."

3 item kit (microfiber, installation fluid, squeegee)

    Wet installs require StickerFab Application Fluid or in a pinch, one drop of dish or hand soap in a cup of water.  Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface.  Then you can slide it around and push out the extra water once it is in place with your squeegee.

    Try doing the install in the shade so it doesn't heat up the vinyl rapidly. 

    We recommend using painter's tape to make a perfectly straight line to use as a guide prior to install.

    Watch our video for more details.  We purposely did a long installation and did not skip any parts.  You may fast forward and rewind at your own leisure. 

    Lower Door Protection - 2021+ Bronco 2 Door
    $39.95
    $39.95
    Product description

    BRONCO Lower Door Protection - 2 Door

    So the first time we took the doors off the Bronco we heard tons of rocks getting thrown at it by those beefy MT tires.  Some light off-roading / mudding showed us where it gets sprayed the most as well.

    We decided to add a little protection and styling at the same time.  This kit is enough to cover the lower door area of one full vehicle.  

    From the factory we also have some paint defects in this area which we will be covering up.  It will also provide small amounts of protection when taking the doors off and putting them inside the storage bags.

    Colors

    We're starting off offering 4 different types of materials.  All of these materials are sourced in the US and are a premium choice for your vehicle.

    Matte black is one of the easiest colors to install in general.  It stretches and responds to heat very well.

    The gloss black we chose has air egress channels and that is why it is a little more expensive than standard colors.  Air egress channels assist in providing a path for air to escape during installation (less bubbles).  Some cost is also due to the fact that it is cast versus calendared.

    General Formulations 3D carbon wrap also has air egress channels and a textured, dark appearance.  We've used it for tons of accents.  To clean, use 303 Aerospace Protectant.  It'll look great!  Don't use any type of wax.  This is the thickest material and offers the highest durability. 

    Clear Oracal ORAGUARD 270G stone protection offers a transparent solution to paint protection.  It is 6 mil in thickness.

    All options have high outdoor durability ratings.

    NOTE:  2 sets are sold at a reduced price.  Keep it as a backup or in case your first install proves to be difficult.

    INSTALLATION

    Clean the application area to prepare it for installation.  Just use a wax free detailing spray if your vehicle is not too dirty.  Please reference our four door video until we are able to shoot a new one.  WE HIGHLY recommend that you have a friend help you hold the main piece as it is large and can catch air.  In general holding it yourself is awkward.

    We aligned and installed the small front piece and rear piece first.  This allows you to guide the middle piece to meet up with both. 

    NOTES:  We recommend that the installation area be free of wax and not under direct sunlight.  
    Some will choose to clean the application area with rubbing alcohol which is okay.

    "Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."

    3 item kit (microfiber, installation fluid, squeegee)

      Wet installs require StickerFab Application Fluid or in a pinch, one drop of dish or hand soap in a cup of water.  Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface.  Then you can slide it around and push out the extra water once it is in place with your squeegee.

      Try doing the install in the shade so it doesn't heat up the vinyl rapidly. 

      We recommend using painter's tape to make a perfectly straight line to use as a guide prior to install.

      Watch our video for more details.  We purposely did a long installation and did not skip any parts.  You may fast forward and rewind at your own leisure. 

      Additional information
      NameLower Door Protection - 2021+ Bronco 2 Door
      SKU21BRONCOLWDR2-MBX2
      VendorStickerFab
      Color Black (Matte), Black (Gloss), 3D Carbon (Black), Clear (Rock Guard)
      Set 1 Set with Squeegee, 2 Sets with Squeegee
      Shipping & returns
      BUCKLE UP OFF-ROAD RETURN, CANCELLATION, & SHIPPING POLICY
        CANCELLATION POLICY:
        You may cancel your order if it has not shipped. Please reach out to us promptly with your full name, order number, reason for cancellation, and the specific items you wish to cancel. Please note that cancellations are subject to a 10% fee based on the original purchase price. This fee covers expenses incurred from our vendors and credit card processors, reflecting the costs associated with processing your initial transaction.

        RETURN POLICY: We offer a 30 days returns policy. If your item arrives damaged or is found to be defective, please contact our customer service immediately. We are committed to resolving this for you promptly. For all other orders, please note that a restocking fee and shipping charges will apply.

        If you accidently ordered an item, received the package and didn’t open it, you may receive a refund for the item's cost, minus the initial shipping, return shipping, and restocking fees.

        RESTOCKING FEES: Please be aware that all returns are subject to a restocking fee. To determine the specific restocking fee for your return, kindly inquire with your customer support representative.

        In cases of new product being returned the restocking fee is 10%. In cases where items exhibit damage, are missing parts, are not in their original condition, or show clear signs of use unrelated to any error on the part of Buckle Up Off-Road, a full restocking fee of 15% will be applied. It is essential to verify the compatibility of the selected parts with your vehicle model before placing your order. Should you have any questions, please reach out to us before ordering, as you may be responsible for both restocking and shipping fees.

        A restocking fee is designed to cover the various expenses associated with processing returns, including transaction fees, shipping costs, and administrative fees.

        While we strive to maintain a fair and transparent process, we do need to account for these expenses, which is why we have implemented a nominal restocking fee. This fee helps us offset some of the costs incurred, ultimately contributing to maintaining our everyday low prices.

        Non-Returnable Items: Mount and Balance Wheel & Tire Packages Clearance Items Opened Items (If damaged or defective contact our customer service) Used or Installed Items Special Order Items Incomplete Items Items with Incomplete or Damaged Packaging Engine Internals Electronics Body Parts Oil and Aerosol Items Ford OEM Genuine Parts Wheel Spacers

        REFUNDS: Upon receipt of the returned item, the process and method of issuing your refund will be contingent on the item's condition and the overall order duration. Your refund will be processed, subtracting any fees communicated by your customer support representative when you provide your RMA# and return details. Cancellations will receive a complete refund unless stated otherwise. If a gift card was utilized, the refund will initially be credited to the gift card, followed by the second form of payment.

        Please keep in mind: It may require 3-5 business days for your return to be received, inspected, and processed. Refunds will be processed using the original payment method. Buckle Up Off-Road cannot issue a refund to an account not on record or any other separate accounts.

        For refunds via Credit Card, it may take 3-5 business days to reflect on the customer's end. Refunds through PayPal may take 1-2 business days to show on the customer's end. Gift Card refunds may take 1-2 business days to activate.

        SHIPPING: Buckle Up Off-Road ships via multiple carriers such as FedEx, UPS, USPS, and DHL. We cannot guarantee the shipping company used to deliver your products. Your order may be shipped in multiple boxes from different carriers. Orders take 24hrs to process and transit times vary. Shipping cutoff is 3:30pm EST. International orders are subject to higher shipping fees, and we reserve the right to add to it.

        Any modifications to an address after the order is placed is subject to a fee. The flat rate fee for a single smaller package is $20, and for larger or multiple packages the fee is not limited to $60.

        To prevent fraud, all shipments over $500 must be signed for. We will make three delivery attempts, which must be received by the recipient. Failure to receive the delivery within these three delivery attempts, will result in a shipping charge After the package is redelivered to us as well as a charge to reship the item to you.

      Recently viewed products

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)